Machine vision applications for UK manufacturers
Find the inspection route that matches your immediate quality problem—from labels and date codes to assembly quality, traceability, rejection, robotic guidance and existing-line upgrades.
Start with what must be proved.
Machine vision is most successful when the required quality decision is clear before the camera is chosen.
These application pages answer the practical questions production and quality teams ask: what can be checked, what samples are needed, what affects accuracy, what can be logged and where the method has limits.
See our feasibility and integration processOCR, OCV & code inspection
Automatically read or verify date codes, batch numbers, lot codes, serial marks and machine-readable codes before the product leaves the line.
Explore application →02Label & packaging inspection
Check every pack for the correct label, position, printed data and visible packaging defects before dispatch.
Explore application →03Seal, closure & fill-level inspection
Detect missing, high, skewed or incorrect closures, visible seal-area faults and out-of-limit fill levels at production speed.
Explore application →04Robot guidance & pick-and-place
Give robots reliable position and orientation data for picking, placing, loading or processing components that do not arrive in one fixed location.
Explore application →05Linescan & web inspection
Build a high-resolution image of continuously moving material to find surface, print, edge and dimensional defects across the full web width.
Explore application →06Vision retrofit & integration
Add automated camera inspection to an existing line with the mechanics, controls, tracking and reject response engineered as one working system.
Explore application →07Assembly verification
Confirm that the right components are present, correctly oriented and properly seated before release.
Explore application →08Inspection data & traceability
Link results, images, codes, recipes and reject events to useful production records where specified.
Explore application →09Automatic reject systems
Track failed products to a suitable reject and confirm the intended item entered the controlled reject route.
Explore application →Which page answers your question?
Use the desired production outcome to reach the most relevant starting point.
| If you need to… | Start with… | Common checks |
|---|---|---|
| Verify printed variable data | OCR and OCV inspection | Date, batch, serial, barcode and Data Matrix |
| Prevent the wrong pack leaving the line | Label and packaging inspection | Identity, presence, position, artwork and codes |
| Check bottles, tubs or sealed packs | Seal, closure and fill level | Caps, tamper features, visible seals and level |
| Find components for automation | Robot guidance | Location, angle, pick and placement verification |
| Inspect continuous material | Linescan and web inspection | Surface, print, edge, width and defect maps |
| Verify a complete product assembly | Assembly verification | Presence, variant, seating, orientation and quality gate |
| Retain inspection evidence | Inspection data and traceability | Images, results, identity, trends and system links |
| Remove and confirm failed products | Automatic reject systems | Tracking, actuation, confirmation, bins and faults |
| Add cameras to an existing machine | Vision retrofit and integration | Survey, PLC, tracking, reject and commissioning |
Machine vision application FAQs
Which vision inspection application should I start with?
Start with the product, defect, line speed and required response. We then select the camera, lighting, software and integration method around that evidence.
Can several checks run in one vision system?
Yes. Presence, orientation, measurement, label, code and surface checks can be combined when the camera views and resolution support every requirement.
Can the system store inspection images and data?
Yes, where specified. Retention rules, image selection, result fields, access and integration with production systems are agreed during design.